Plant size: Single plant (3-4 leaves) | Pot Included | Free Shipping
Recommended Potting mix
The Atabapoense philodendron plant grows well in loose, well-drained organic soil. By adding stones, orchid bark, or a small amount of sand to the planter, you can improve drainage and aeration. You may get some peat moss or sphagnum moss and mix it in with the potting mix to balance this out and ensure that they don’t dry out too quickly but have moist soil as well.
This will help hold in some water while still allowing the plant to breathe around its roots and avoid suffocation due to waterlogging.
The optimal pH level for soil is 6.1-7.3, which is somewhat acidic but not acidic enough to be considered neutral. Always make sure you choose a pot or planter with good drainage!
To stay green and fresh, they need enough sunshine to create enough chlorophyll. So these beauties will be happy if treated as an outdoor plant with some shades. Keep your Philodendron Atabapoense between 70-85 percent indirect sunshine and partial shade for optimal solar exposure.
The Atabapoense may withstand some direct sunlight without harm. The plant, on the other hand, requires acclimatization to survive. If not, the plant’s leaves will get bleached, then brown, and eventually wither. They don’t do well in prolonged bright light because they grow in rainforests with many overhead covers.
You can’t grow them in the dark, either; if there isn’t enough light, they won’t survive. If you’re growing this plant in an office with no windows, you’ll need to offer at least artificial grow lights to keep it alive.
When it comes to the watering needs of this Philodendron, understanding the drying cycles of the soil in your zone is usually a good idea. This will assist you in developing and maintaining a moderate watering strategy.
When you finish analyzing it, you may arrange its watering schedule by keeping track of the average time it takes for the soil to dry thoroughly.
In the spring and summer, it should be watered once or twice a week.
While it doesn’t need to be watered for two weeks in the winter.
Pro tip: Overwatering is a severe problem for this Philodendron Atabapoense. Droopy leaves indicate that the plant is either under-watered or over-watered.
Ideal Temperature & Humidity
Your Atabapoense Philodendron will best flourish at 75 to 85 degrees Fahrenheit. And it is self-evident that it cannot tolerate frigid temperatures. As a result, if you place them outdoors, you’ll have to move your plant inside for the winter.
In the fall and winter, move your Philodendrons to a warm location before the temperature drops below 55 degrees Fahrenheit (12 degrees Celsius)
Philodendron Atabapoense also thrives in humid environments. Maintain a humidity level of 65 to 70% around your Philodendron if you want it to grow healthier and greener. It’s best to keep this plant in a group with other plants so that the humidity level around it remains constant.
The use of a humidifier is also a viable option. With a humidifier, you may achieve the same indoor humidity levels as rainforests. Another best and most straightforward method is to use a pebble water tray underneath the plant. Ensure, however, that the water remains at a lower level and does not reach the soil through the drainage holes.
Although you don’t need to fertilize your Philodendron Atabapoense very often, a decent meal can help increase its foliage and ensure that it grows happily and healthily. It will be alright if you feed it with a suitable fertilizer 2-3 times a year. This yearly feeding will let your Philodendron grow more quickly.
You may use a slow-release fertilizer available to the plant for a more extended period.
Feeding should be done in the following order: early spring, summer, and late summer. Also, for luxuriant development, add a diluted vitamin solution to its base. Always remember that overfeeding can burn its roots, so be careful with the amount you feed it.
The Philodendron Atabapoense is relatively easy to propagate! No need to buy new plants to multiply your collection. And this can be accomplished by planting stem cuttings in the soil. Don’t worry because we’ll guide you all throughout.
Here’s how you will propagate your Atabapoense Philodendron:
- Cut a few stems and leaves from the stems with a sharp knife.
- Dip the bottom ends of the hair in growth hormone and shave off any surplus. If the product is not available, you can skip this step.
- Plant the cuttings in wet, well-drained soil or a growth medium now.
- Place the pot in the shade. Also, maintain the soil moist and water when the top half of the soil becomes dry.
- In approximately a month, these cuttings will sprout young roots. Around the sixth week, this will result in the creation of infant shoots. In less than four months, with proper care and the right environment, you can have a lovely Philodendron Atabapoense!
If you live in USDA plant hardiness zones 4a to 11, growing these tropical plants can be perfect as an indoor plant or on a patio. The USDA zones 9b to 11 are the most favorable for outdoor planting.
Potting and Pruning
Philodendron plants can be grown in pots, hanging baskets, or as a beautiful tree wrap outside. When it comes to repotting, there is no need to repot for the first 2-3 years. You must, however, change the soil before each growing season.
Occasionally, the philodendron atabapoense requires pruning and care. New growth will be stimulated by light pruning of the plant. Heavy trimming might be unproductive and cause the plant to be shocked, inhibiting its growth.
You may prune the plant by removing any dead, yellowed, or old leaves with a sharp knife. Pruning is a fantastic strategy to assist the plant in conserving energy. To avoid skin irritation from the plant’s sap, always wear gardening gloves when doing so.
Only logged in customers who have purchased this product may leave a review.